section-efbe90b
<mark>Equal</mark> Angle

Equal Angle

Ishtiaq Steel Industry

Our automated drive gates are designed for optimum security and reliability. They are professionally welded, moisture resistant, and made to stand the test of time. We can fabricate gates from any design and size that you require.

It Includes

  • Superior precise quality welds
  • Welds can be made with little or no filler
  • Precise control of welding variables
  • Free of spatter and sparks
  • Low Heat Distortion
<mark>Steel</mark> Channel

Steel Channel

Weldo Metal inc

We can help you with any on/off-site welding. Welding Repair or Replace an alloy including Aluminum, Stainless Steel, Cast Iron, Carbon Steel, Brass, etc. Weld pipes, flanges, coupling, elbows with full penetration welds.

It Includes

  • All position capability
  • Higher deposition rates than SMAW
  • Less operator skill required
  • Long welds can be made without starts and stops
  • Minimal post weld cleaning is required
<mark>Deformed</mark>  Steel Bar

Deformed Steel Bar

Ishtiaq Steel Industry

Early 1900s in TMT era, round bars were used to increase the load baring capacity, this cold twisted deformed process increase the strength of the bar from 250N/m2 to 415N/m2. This is considered as first step towards load baring steel bars in construction industry. Now a days deformed bar is a common tool, formed from carbon steel and is given ridges for better mechanical anchoring reinforced concrete. These kinds of bars normally used for minimizing slippage in concreate during construction. Due to lugs, ribs and reformation on the bar in enhance bond between two materials. More over Deformed bars have more tensile stresses than that of other steel bars. In addition strength of these bars are considered 40 to 80% higher than of any plan bar of same normal size. We can Provide following sizes to our prestigious clients.

It Includes

  • Superior precise quality welds
  • Welds can be made with little or no filler
  • Precise control of welding variables
  • Free of spatter and sparks
  • Low Heat Distortion
Ishtiaq Steel Industry is the largest and one of the oldest manufacturers of Re-rolling steel sections in Pakistan. Since 1975 from their Initial operations, Ishtiaq Steel was involved in the production of mild steel. Keeping future needs and demands, we introduced different products to the local market and diversified our product range.

Contact Us

Subscribe Us

Stay updated with our latest news. We promise not to spam!